Used Water Sprinkler Trucks are heavy-duty industrial special-purpose vehicles equipped with a carbon-steel liquid tank, a power-take-off (PTO) driven centrifugal pump, and multi-angle spray nozzles. This equipment provides continuous water distribution for road dust suppression, soil compaction support, and bulk non-potable water delivery across mining, construction, and municipal job sites.
Technical Specifications
|
Parameter |
Specification Details |
|
Vehicle Type |
Used Water Sprinkler Truck / Water Tanker |
|
Drive Configuration |
4 × 2 (Single Axle) / 6 × 4 (Dual Axle) |
|
Steering Orientation |
Left-Hand Drive (LHD) / Right-Hand Drive (RHD) |
|
Tank Capacity Range |
8,000 L - 20,000 L (8 CBM - 20 CBM) |
|
Tank Shell Material |
High-tensile carbon steel (5 mm wall thickness) |
|
Internal Structure |
Transverse and longitudinal anti-surge baffles |
|
Corrosion Protection |
Internal anti-corrosion epoxy primer coating |
|
Engine Output |
290 HP - 380 HP Diesel |
|
Emission Standard |
Euro II / Euro III / Euro V [Confirm target market compliance] |
|
Transmission |
Manual, 8-speed or 10-speed forward gears |
|
Pumping System |
Self-priming centrifugal pump, PTO-driven |
|
Pump Flow Rate |
40 m³/h - 60 m³/h |
|
Working Coverage |
Front flush width: ≥ 14 m; High-pressure monitor range: ≥ 28 m |
|
Tire Specification |
11.00R20 / 12R22.5 radial tires |
Main Components & Features
Baffled Tank Structure: Welded carbon steel shell incorporating interior transverse and longitudinal baffles to restrict liquid displacement during acceleration, braking, and turning.
PTO-Driven Centrifugal Water Pump: Engages directly via the transmission power take-off to drive water suction and pressurized discharge through integrated piping networks.
Multi-Directional Spray Network: Includes front-mounted duckbill nozzles for wide-angle road washing, rear lower spray bars for dust settlement, and top platform gravity outlets.
Deck-Mounted Water Monitor: Features a $360$-degree manual swivel monitor providing targeted high-pressure stream or fog spray modes for washing off-road equipment and hard-to-reach areas.
Control Valve Cabinet: Encased side manifold housing independent ball valves to select active spray zones, self-priming intake, or gravity tank drainage.
Applications
Mining Haul Roads
Suppresses fugitive dust generated by heavy machinery on unpaved haul roads.
Earthmoving & Construction Sites
Delivers precise moisture content to soil layers prior to compaction grading.
Municipal Infrastructure
Cleans urban street surfaces, flushes curb lines, and irrigates public greenbelts.
Industrial Utility
Transports utility water for site washdowns, concrete mixing support, and temporary dust management.
Vehicle Condition & Inspection
Operational History: Sourced from verified fleet operational inventories with documented service records ranging from 3 to 7 years of prior use.
Chassis & Structural Frame: Visual and dimensional check of frame rails, suspension leaf spring packs, crossmembers, and axle housings to confirm structural soundess.
Engine & Drivetrain: Operational testing of engine compression, thermal performance under load, transmission gear engagement, and main drive axle performance.
Tank & Piping System: Hydrostatic pressure testing of the main tank body, internal baffle welds, valve seals, and pump casing to verify fluid containment.
Brake & Wear Items: Measurement of brake shoe linings, steering linkages, electrical harness connections, and tire tread depth prior to export prep.
Available Configurations
Volumetric Options
Available in 8 CBM (4×2), 12 CBM - 15 CBM (6×4), and $20\text{ CBM}$ heavy-payload variants.
Pumping Variations
Standard PTO centrifugal pumps, with optional secondary engine-driven high-pressure units [Confirm optional inventory status].
Corrosion Treatment
Standard industrial internal coating for non-potable utility water, or optional food-grade tank lining [Requires technical verification per unit].
Export & Delivery Support
Documentation Support: Invoice, packing list, bill of lading, Certificate of Origin, and physical Chassis/VIN validation match reports.
Port Transport: Inland transit coordination from storage yards to departure ports via lowbed trailers or dedicated drive-away drivers.
Shipping Methods: Transport via Roll-on/Roll-off (RORO) vessels or flat-rack containers based on vessel scheduling and destination port handling capabilities.
Customs Compliance: Processing of pre-shipment inspection certificates matching destination country importation mandates.
FAQ
Q: What liquid media can be transported in these standard carbon-steel tank trucks?
A: These trucks are configured for non-potable industrial water, construction site compaction water, and river/well water for dust control. They are not rated for corrosive chemicals or fuel.
Q: Can the spray nozzles be operated while the truck is moving?
A: Yes. The pump operates via a transmission-mounted power take-off (PTO), allowing simultaneous vehicle propulsion and pressurized water spraying.
Q: What parameters must be provided to obtain an accurate shipping and unit quote?
A: Required details include: destination discharge port, required tank volume (CBM), preferred drive configuration (4×2 or 6×4), and emission standard requirements for your country.
Q: How are spare parts sourced for these pre-owned chassis?
A: Vehicles are built on standardized commercial chassis platforms whose routine service items (filters, brake pads, seals, valves) are widely available through standard heavy-truck distribution networks globally.
Hot Tags: used water sprinkler trucks, China used water sprinkler trucks
